MULTI-AXIAL TENSION / POINT STRESS RESI

Product Description

MULTI-AXIAL TENSION / POINT STRESS RESI

LARGE SCALE HYDRO-STATIC POINT STRESS AND MULTI-AXIAL
TENSION RESISTANCE DEVICE

GENERAL FEATURES

– Designed according ASTM D 5617 & ASTM D 5514 as well as the latest
recommendations of the D 35 Committee
– Modular design
– 24″ diameter test area
– Automated pressure regulating system with operator adjustable rates of pressure
increase, ranging from less than 1.0 psi per hour to greater than 10 psi per minute.
Controlled pressure available for linear ramp over a 600 hour test (optional)
– System may also be operated in a inches per minute mode from less than 0.1in/min
to over 1.0 in/min
– Chartable and scalable pressure output signal
– Available in various combinations of options and standard features
– A variety of testing accessories are also available for new or existing test devices

MULTI-AXIAL TENSION RESISTANCE FEATURES

– 360 degree viewing screen (shield)
– Non contact, charitable sample deflection measurement device for calculating
elongation (strain)
– Automatic shut down upon sample failure

POINT STRESS FEATURES

– Standardized truncated cones featuring highly sensitive sensors integrated into the
standard cone design detecting failures instantly
– System shut down upon sensed failure
– Easily adaptable for pressure testing of site specific subgrades or other prepared
profiles
– All packages available 10-14 weeks from order date

LARGE SCALE HYDRO-STATIC POINT STRESS (LSHPS)
& MULTI-AXIALTENSION RESISTANCE DEVICE (MATR)

1. LSHPS/MATR combination fully automated

2. MATR automated and adaptable to LSHPS

2a. Adapter kit for MATR to LSHPS

3. MATR automated non-adaptable to LSHPS

4. LSHPS/MATR non-automated with non-contact
measurement and cone sensors

5. MATR non-automated with non-contact measurement adaptable to LSHPS

6. MATR non-automated with non-contact measurement not adaptable to LSHPS

7. LSHPS with automated pressure system and cone sensors

7a. Adapter kit for LSHPS to MATR

8. LSHPS non automated with cone sensors and failure indicators, regulator,
and gage

9. MATR non automated with manual pressure regulation and deflection measured
by a contact foot and recorded manually

ADDITIONAL LSHPS AND MATR ITEMS

1. Pressure automating electronics for existing mode
2. LSHPS sensor tip cones (each)
3. LSHPS cone set with failure indicating electronics
4. LSHPS critical cone height plate set
5. Fixed aggregate subgrade for LSHPS
6. Riser flange assembly for LSHPS
7. Strip Chart recorder for both tests
8. Digital Data Recorder System for PC Data Recovery